Phone1:
+86-18588957260
Phone2:
+86-18588959609
Wroking:
08:00-18:00
在线客服微信二维码
WeChat1
在线客服微信二维码
WeChat2

Automotive series has been specifically designed for the cleaning and degreasing of all type of parts and components in Automotive industry.   It achieves excellent cleaning results in many types of materials, especially in complex parts, where the ultrasounds have excellent results thanks to its   high penetration capacity.   Thus, the results while cleaning automobile engines are spectacular, even in those smaller and delicate parts.

Lowest energy consumption.   Exclusive and patented system.

Our Automotive series uses 28 kHz frequency with which the best results for the Automotive Sector are achieved.   Highest frequency levels (60-90 kHz) are less powerful, and are used for different applications with lower levels of dirt or more delicate materials (optical lenses, electronics, carburetor, etc.)

Cleaning of automotive engines by ultrasounds provides many benefits and advantages regarding quality and cost savings.


Clean your automotive components by ultrasound

UltraTecno solutions for automotive

The provisions and characteristics of our Automotive Series applications offer the best market performance:

High Power UltraTecno Transducers

Automotive Series uses our exclusive ultrasonic plates.   These are 25% thicker in comparison with conventional technology, reducing the risk of ultrasonic erosion and breakages due to fatigue, and providing more uniform cleaning.

The transducers are built with high-quality phosphorous-copper/silver alloys to minimize the accumulation of heat, to extend the life of the transducers and piezoelectric crystals and to reach the best performance levels.   In short, it is the most effective system to automotive engine cleaning with ultrasounds.

Complete thermal insulation

Complete thermal insulation

Our equipment is completely insulated (including the cover) to avoid heat losses and to ensure quick attainment of the required temperature.

Laminar flow Separation System (LFSS)

After dirt and grease are extracted from the parts, they must be removed from the main barrel.   Our exclusive Laminar Flow Separation System (LFSS) takes floating grease to an auxiliary tank where it can be easily removed.

Complete recirculation of cleaning liquid

The parts to be cleaned are shaken inside the deposit during the automotive engine cleaning process so the liquid may agitated inside the tank.   This process considerably improves the results.

Frequent flushings

We have eight different frequent flushings that may be configured to improve performance and to achieve better distribution of the cavitation field with a bandwidth up to 3%.

Programmable automaton and Touch-Screen

Our equipment includes a Programmable Automaton (PLC) for process control.

The user controls the process through a colour touch-screen in various languages.   It can be activated in the automatic mode which does not require the presence of the operator during the automotive engine cleaning process with ultrasound.

Elevator tray

The parts are easily placed in the cleaning tray.

The tray is activated pneumatically/hydraulically and can manipulate operation loads up to 2,100 kg or higher.

100% Stainless Steel Construction

All our machines are completely built in stainless steel.   Our thorough quality control systems ensure the non-existence of leaks in weldings or mechanical unions.

Stop & Go

This operation mode facilitates the sloughing of specific types of dirt with high adherence levels.

Our system cleans automotive engines in a quick, safe and inexpensive manner, and assures that the smallest and most delicate parts are always ready.